Front walk to the door
The walk from the driveway or sidewalk to your front door gets the most foot traffic and the most eyes, so we set its width and line to suit the house.
Sunken pavers or a cracked walk usually trace back to soft ground. We build yours on a compacted base so it stays put.

Walkway construction in Fresno means laying out a path, digging it out and packing the soil and base hard, then setting pavers or pouring concrete on top, so you end up with a walk that stays level underfoot. Most of the job happens below what you'll ever see.
Maybe your old walk has sunk or cracked, or the way to the front door is still dirt and stepping stones. The price comes down to the size of the walk, pavers or concrete and the finish you pick, how much digging and soil work the ground needs, and whether an old walk has to come out first. The schedule turns on our crew's calendar, any permit the job needs and the weather on pour day. I come out, measure and look at the ground, and you get the price in writing. We're based in Fresno and build walks across the cities around it, including Clovis, Madera, Selma, Sanger and Kingsburg.
I come out, walk the path with you and look at the ground before I price anything, so the person writing your number is the one who knows how it gets built.
Our own crew does the work with a lead mason running the site, the same way I ran crews on big commercial jobs before starting this company in 2013.
If a few pavers settled or one section of concrete broke, I'll tell you a repair can handle it. I'd rather fix what's wrong than sell you a whole new walk.
We start by laying out the path with you, so the width and line fit the way you actually walk to the door. Then we dig it out, compact the soil, spread the base and compact that too, because a walk that sinks usually started on soft ground. On a paver walk we set edge restraints, the borders that keep the outer row from creeping, then spread the bedding sand and lay the pavers. On a concrete walk we form it, pour, finish the surface and cut joints, the shallow grooves you see across a sidewalk, so any cracks land in them instead of wandering across the slab. We clean up and haul off the spoils before we leave.
A walk often runs past a planting bed or ends at the steps, so it pays to plan the pieces around it at the same time. If you want a low garden wall along the path, our brick wall installation work can follow the same layout. For natural stone borders, steps or a landing at the door, that's stone masonry, and doing it with the walk means one dig instead of two.
The walk from the driveway or sidewalk to your front door gets the most foot traffic and the most eyes, so we set its width and line to suit the house.
A path down the side yard to the gate or trash cans keeps you out of mud and loose gravel, and it's usually narrower and simpler, which keeps the cost down.
A walk from the back door to a patio or garden ties the yard together. We set the slope so rain runs off the path and away from the house.
When an old walk has sunk, heaved or broken across, we break it out, haul it away and rebuild on a compacted base so the new one starts on firm ground.
Send the form and we'll get back to you within one business day to set a time. I come out, measure the path and give you a free written estimate, with no obligation.
The walkway's rough length and width let me think through the dig and the base before I arrive, so the visit goes quicker and we can talk about your yard instead.
Say whether you're picturing pavers, concrete or haven't decided yet. Either way, I'll look at the ground and the layout with you before writing anything down.
Let us know if the path starts at the driveway or a curb, because that spot needs its own joint and sometimes a clean cut into the existing slab.
These examples show paver patterns, brushed concrete, brick borders and stone edging, so you can point to what you like when we meet.
Straight answers to what homeowners ask about cracks, cost, sinking pavers, hot pour days and who can legally build a walkway here.
Some cracking is likely, because cracks in a concrete walk can't be prevented entirely, but well-placed joints control and limit them. A stray crack is mostly a looks problem and generally leaves the concrete sound. Wire mesh won't stop cracking, though it tends to keep cracks from opening up. Satisfaction guaranteed on every job.
An installed 4-inch concrete slab in California usually costs about $9 to $18 per square foot, with labor and materials included. That's the usual statewide range for a slab, not our price for your walk. Your own number comes after I measure on site, and you get it in writing.
Only if the whole job comes in under $1,000, needs no permit and the person hires no one to help, because that's California's minor work limit for working without a contractor license. In Fresno, any permit your work requires comes through the city's Building and Safety Permit Counter. We're licensed and insured, and when a job needs a permit, we file it and handle the paperwork.
Pavers usually sink because the soil under the base wasn't packed hard enough. Compacting that soil is critical to how a paver walk holds up, and good compaction keeps settling to a minimum. Before you hire anyone, ask how they'll compact the soil before the base goes down, since that answer tells you a lot about the crew.
Carefully, because high heat, low humidity and wind all affect concrete and the way it's mixed, hauled and placed. It's fair to ask any crew how it handles those conditions on pour day. I'll talk through how we'd handle the pour for your walk when I'm out for the estimate.
Call (559) 319-0148 any day of the week, early morning until 9 PM, or send the form, and we'll get your walk measured and priced.